THE CUE BUILDING BOOK
From Tree, To Tip, To Trade Show!
By: Chris Hightower
($69.95)

Over 260 pages! BRAND NEW THIRD EDITION!

This is the most extensive book on cue building written to date. As the title suggests, it takes you through the complete cue building process from the sawmill, to the finished cue, to marketing your cues. It covers many things that the videos don’t. However, it is said that a picture is worth a thousand words. It covers doing work on wood lathes, metal lathes, and of course, cue lathes. It shows the table saw tapering machine, how to build your own spray booth, kiln, wood stabilizer dipping tank, collets, linen presses, inlay patterns and much more. It shows how to put on the finish with and without spraying, Irish linen and leather wraps, V-groove and butterfly points, inlays and much more.
There is an "Advice from the Masters" chapter that gives advice to beginners from some of America’s most well known cue makers who have been building cues for decades. There is also a brief history on cue building in the USA. There is a suppliers list showing where to buy almost everything you need to build cues from shaft wood, to exotic woods and veneers, cue parts, manual and CNC machinery and small tooling. The book has nearly two hundred drawings, showing how to do the various operations and how to make the special jigs.
It is a wealth of information contained in a format that is easy to read and refer back to. There is a section for your own notes in the back. Every beginner to intermediate cue maker should have this book and the advanced cue maker might still pick up some little tricks.

Over 260 pages! BRAND NEW THIRD EDITION!

DVD=Videos
BASIC CUE BUILDING
AND REPAIR VIDEO!
By: Chris Hightower
2.5 Hours (DVD or VHS)
($50.00)
This video covers replacing tips, ferrules, wraps, shaft reconditioning, joint work,
turning butts and shafts from scratch with and without taper attachments and more.
All the work is done on our Cue Smith Lathes.
This video comes with a $50 credit toward the purchase a Cue Smith Lathe!

ADVANCED CUE BUILDING!
Volume 1
Points and Inlays!
By: Chris Hightower
Almost 3 Hours (DVD)
($50.00)
Includes: Inlaying, Pattern Making, Veneers, Re-Cut, Full Splice and Butterfly Points and more.
The work is done on our Cue Smith Lathe and Inlay Machine.
This video comes with a $50 credit toward the purchase of a Cue Smith Inlay Machine!

ADVANCED CUE BUILDING!
Volume 2
Cue Assembly, Boring, Coring, Tenons and More.
By: Chris Hightower
Almost 2.5 Hours (DVD)
($50.00)
Includes: Assembly, Boring, Coring, Indicator Readouts, Ring Work, Tenons, Threading and more!

CUE FINISHING MADE SIMPLE!
By: Chris Hightower
Almost 3 Hours (DVD)
($50.00)
Includes: Cue Cote Epoxy, Super Glue, and Water Based Urethane Finishing,
Re-Finishing , Carbide Sanding Mandrels, Brushing and Spraying Methods!

***INTERNET SPECIALS***

The Cue Building Book and Any Two DVD's
Only $150
Save $19.95
OR
The Cue Building Book and Any Three DVD's
Only $195
Save $24.95
OR

THE COMPLETE CUE BUILDING COURSE:
The Cue Building Book and All Four DVD's
Only $240
Save $29.95

ADD the Blue Book of Cues to any above

Book and DVD package for $35.

Ordering Information:

If you are in the continential USA and want to order online go to your paypal

account and use cueman@cuesmith.com for the money receiver's address.

USA Shipping charges for the Cue Building book is $13

USA Shipping for the Cue Building book and one to four DVDs is $15

USA Shipping for the Cue Building Book, DVDs and Blue Book of Cues is $19

In the Paypal subject line type which items you are ordering.

Or you can call 770-684-7004 between 2 and 6pm eastern time with credit card.

If you are outside of the USA then email us your order

to cueman@cuesmith.com and we will send you a paypal total.

For complete Cue Building equipment visit www.cuesmith.com